dmesg - 8192 MB DDR3-1600MHz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.3.1.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Jan 3 21:39:27 UTC 2014
Command line: ro root=/dev/mapper/vg_tau-tau_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_tau/tau_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_tau/tau_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000784a0000 (usable)
BIOS-e820: 00000000784a0000 - 00000000784a7000 (ACPI NVS)
BIOS-e820: 00000000784a7000 - 000000008b97f000 (usable)
BIOS-e820: 000000008b97f000 - 000000008bcff000 (reserved)
BIOS-e820: 000000008bcff000 - 000000008bd13000 (ACPI data)
BIOS-e820: 000000008bd13000 - 000000008bde6000 (ACPI NVS)
BIOS-e820: 000000008bde6000 - 000000008bfff000 (reserved)
BIOS-e820: 000000008bfff000 - 000000008c000000 (usable)
BIOS-e820: 0000000097000000 - 000000009f200000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000045fe00000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF04C0
DMI: /DZ87KLT75K, BIOS KLZ8711D.86A.0336.2013.0516.1957 05/16/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x45fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FC0000000 write-back
2 base 0440000000 mask 7FE0000000 write-back
3 base 00C0000000 mask 7FC0000000 uncachable
4 base 00A0000000 mask 7FE0000000 uncachable
5 base 0098000000 mask 7FF8000000 uncachable
6 base 0097000000 mask 7FFF000000 uncachable
7 base 045FE00000 mask 7FFFE00000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 1GB, type WB
reg 2, base: 17GB, range: 512MB, type WB
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 2560MB, range: 512MB, type UC
reg 5, base: 2432MB, range: 128MB, type UC
reg 6, base: 2416MB, range: 16MB, type UC
reg 7, base: 17918MB, range: 2MB, type UC
total RAM covered: 16238M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 256MB, type WB
reg 2, base: 2304MB, range: 128MB, type WB
reg 3, base: 2416MB, range: 16MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17GB, range: 512MB, type WB
reg 8, base: 17918MB, range: 2MB, type UC
e820 update range: 0000000097000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x8c000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000008c000000
0000000000 - 0080000000 page 1G
0080000000 - 008c000000 page 2M
kernel direct mapping tables up to 8c000000 @ 8000-a000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000045fe00000
0100000000 - 0440000000 page 1G
0440000000 - 045fe00000 page 2M
kernel direct mapping tables up to 45fe00000 @ 9000-b000
RAMDISK: 36f3a000 - 37fefadd
ACPI: RSDP 00000000000f0490 00024 (v02 INTEL)
ACPI: XSDT 000000008bd03080 0007C (v01 INTEL DZ87KLT 00000150 AMI 00010013)
ACPI: FACP 000000008bd0e220 0010C (v05 INTEL DZ87KLT 00000150 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 000000008bd03188 0B094 (v02 INTEL DZ87KLT 00000150 INTL 20091112)
ACPI: FACS 000000008bde4080 00040
ACPI: APIC 000000008bd0e330 00092 (v03 INTEL DZ87KLT 00000150 AMI 00010013)
ACPI: FPDT 000000008bd0e3c8 00044 (v01 INTEL DZ87KLT 00000150 AMI 00010013)
ACPI: SSDT 000000008bd0e410 00539 (v01 INTEL DZ87KLT 00000150 INTL 20051117)
ACPI: SSDT 000000008bd0e950 00AD8 (v01 INTEL DZ87KLT 00000150 INTL 20051117)
ACPI: SSDT 000000008bd0f428 001C7 (v01 INTEL DZ87KLT 00000150 INTL 20051117)
ACPI: MCFG 000000008bd0f5f0 0003C (v01 INTEL DZ87KLT 00000150 MSFT 00000097)
ACPI: HPET 000000008bd0f630 00038 (v01 INTEL DZ87KLT 00000150 AMI. 00000005)
ACPI: SSDT 000000008bd0f668 0036D (v01 INTEL DZ87KLT 00000150 INTL 20091112)
ACPI: SSDT 000000008bd0f9d8 0329E (v01 INTEL DZ87KLT 00000150 INTL 20091112)
ACPI: DMAR 000000008bd12c78 00090 (v01 INTEL DZ87KLT 00000150 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000045fe00000
Bootmem setup node 0 0000000000000000-000000045fe00000
NODE_DATA [000000000000a000 - 000000000003dfff]
bootmap [0000000000100000 - 000000000018bfbf] pages 8c
(8 early reservations) ==> bootmem [0000000000 - 045fe00000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [0036f3a000 - 0037fefadd] RAMDISK ==> [0036f3a000 - 0037fefadd]
#4 [000009b000 - 0000100000] BIOS reserved ==> [000009b000 - 0000100000]
#5 [0002020000 - 0002020323] BRK ==> [0002020000 - 0002020323]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
#7 [0000009000 - 000000a000] PGTABLE ==> [0000009000 - 000000a000]
found SMP MP-table at [ffff8800000fd7f0] fd7f0
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 17918MB)
[ffffea0000000000-ffffea000f5fffff] PMD -> [ffff880028600000-ffff8800363fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0045fe00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000001 -> 0x0000009b
0: 0x00000100 -> 0x000784a0
0: 0x000784a7 -> 0x0008b97f
0: 0x0008bfff -> 0x0008c000
0: 0x00100000 -> 0x0045fe00
On node 0 totalpages: 4110099
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3832 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 553393 pages, LIFO batch:31
Normal zone: 48377 pages used for memmap
Normal zone: 3490055 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000784a0000 - 00000000784a7000
PM: Registered nosave memory: 000000008b97f000 - 000000008bcff000
PM: Registered nosave memory: 000000008bcff000 - 000000008bd13000
PM: Registered nosave memory: 000000008bd13000 - 000000008bde6000
PM: Registered nosave memory: 000000008bde6000 - 000000008bfff000
PM: Registered nosave memory: 000000008c000000 - 0000000097000000
PM: Registered nosave memory: 0000000097000000 - 000000009f200000
PM: Registered nosave memory: 000000009f200000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 9f200000 (gap: 9f200000:50e00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4047280
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_tau-tau_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_tau/tau_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_tau/tau_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:588 warn_invalid_dmar+0x7a/0x90() (Not tainted)
Hardware name:
[Firmware Warn]: Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Intel Corp.; Ver: KLZ8711D.86A.0336.2013.0516.1957; Product Version:
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.32-431.3.1.el6.x86_64 #1
Call Trace:
[] ? warn_slowpath_common+0x87/0xc0
[] ? warn_slowpath_fmt_taint+0x3f/0x50
[] ? early_ioremap+0x13/0x15
[] ? warn_invalid_dmar+0x7a/0x90
[] ? _etext+0x0/0x3
[] ? check_zero_address+0x5d/0x118
[] ? acpi_get_table_with_size+0x5a/0xb4
[] ? _etext+0x0/0x3
[] ? detect_intel_iommu+0x12/0x91
[] ? pci_iommu_alloc+0x5e/0x6c
[] ? mem_init+0x19/0xec
[] ? start_kernel+0x221/0x430
[] ? x86_64_start_reservations+0x125/0x129
[] ? x86_64_start_kernel+0x115/0x124
---[ end trace a7919e7f17c0a725 ]---
Disabling lock debugging due to kernel taint
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 15980812k/18348032k available (5325k kernel code, 1907636k absent, 459584k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 66060288 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3498.855 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6997.71 BogoMIPS (lpj=3498855)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:588 warn_invalid_dmar+0x7a/0x90() (Tainted: G I--------------- )
Hardware name:
[Firmware Warn]: Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Intel Corp.; Ver: KLZ8711D.86A.0336.2013.0516.1957; Product Version:
Modules linked in:
Pid: 1, comm: swapper Tainted: G I--------------- 2.6.32-431.3.1.el6.x86_64 #1
Call Trace:
[] ? warn_slowpath_common+0x87/0xc0
[] ? warn_slowpath_fmt_taint+0x3f/0x50
[] ? warn_invalid_dmar+0x7a/0x90
[] ? alloc_iommu+0x3b/0x310
[] ? dmar_table_init+0x199/0x345
[] ? enable_IR_x2apic+0x10/0x1b0
[] ? default_setup_apic_routing+0x16/0x7b
[] ? native_smp_prepare_cpus+0x370/0x397
[] ? kernel_init+0x10b/0x2f7
[] ? child_rip+0xa/0x20
[] ? kernel_init+0x0/0x2f7
[] ? child_rip+0x0/0x20
---[ end trace a7919e7f17c0a726 ]---
dmar: parse DMAR table failure.
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz stepping 03
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (55981.68 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 784a0000 (28672 bytes)
PM: Registering ACPI NVS region at 8bd13000 (864256 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f7ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x9f200000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x9f200000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xee400000-0xee7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:03.0: reg 10: [mem 0xef434000-0xef437fff 64bit]
pci 0000:00:14.0: reg 10: [mem 0xef420000-0xef42ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xef43e000-0xef43e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: reg 10: [mem 0xef400000-0xef41ffff]
pci 0000:00:19.0: reg 14: [mem 0xef43c000-0xef43cfff]
pci 0000:00:19.0: reg 18: [io 0xf060-0xf07f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xef43b000-0xef43b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xef430000-0xef433fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xef43a000-0xef43a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xef439000-0xef4390ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xef3a0000-0xef3bffff]
pci 0000:02:00.0: reg 14: [mem 0xef380000-0xef39ffff]
pci 0000:02:00.0: reg 18: [io 0xe020-0xe03f]
pci 0000:02:00.0: reg 30: [mem 0xef360000-0xef37ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0xef340000-0xef35ffff]
pci 0000:02:00.1: reg 14: [mem 0xef320000-0xef33ffff]
pci 0000:02:00.1: reg 18: [io 0xe000-0xe01f]
pci 0000:02:00.1: reg 30: [mem 0xef300000-0xef31ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xef300000-0xef3fffff]
pci 0000:00:01.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [io 0xd050-0xd057]
pci 0000:03:00.0: reg 14: [io 0xd040-0xd043]
pci 0000:03:00.0: reg 18: [io 0xd030-0xd037]
pci 0000:03:00.0: reg 1c: [io 0xd020-0xd023]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 24: [mem 0xef210000-0xef2101ff]
pci 0000:03:00.0: reg 30: [mem 0xef200000-0xef20ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xef200000-0xef2fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:02.0: reg 10: [mem 0xef104000-0xef1047ff]
pci 0000:05:02.0: reg 14: [mem 0xef100000-0xef103fff]
pci 0000:05:02.0: supports D1 D2
pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:02.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:04:00.0: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xef100000-0xef1fffff] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: reg 10: [mem 0xef000000-0xef01ffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 06-09]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xee800000-0xef0fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
pci 0000:07:07.0: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:00.0: bridge window [mem 0xee800000-0xeeffffff]
pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:00.0: reg 10: [mem 0xee800000-0xeebfffff 64bit]
pci 0000:08:00.0: reg 18: [mem 0xeec41000-0xeec417ff 64bit]
pci 0000:08:00.0: reg 20: [mem 0xeec40000-0xeec400ff]
pci 0000:08:00.0: reg 30: [mem 0xeec00000-0xeec3ffff pref]
pci 0000:08:00.0: supports D1
pci 0000:08:00.0: PME# supported from D0
pci 0000:08:00.0: PME# disabled
pci 0000:07:01.0: PCI bridge to [bus 08-08]
pci 0000:07:01.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:07:01.0: bridge window [mem 0xee800000-0xeecfffff]
pci 0000:07:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:09:00.0: reg 10: [mem 0xeee00000-0xeeefffff]
pci 0000:09:00.0: reg 18: [io 0xc000-0xc01f]
pci 0000:09:00.0: reg 1c: [mem 0xeef00000-0xeef03fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:07:07.0: PCI bridge to [bus 09-09]
pci 0000:07:07.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:07.0: bridge window [mem 0xeee00000-0xeeffffff]
pci 0000:07:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 0a-42]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xee0fffff]
pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x004e-0x004f]
pnp 00:06: [io 0x0061]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067]
pnp 00:06: [io 0x0070]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b2-0x00b3]
pnp 00:06: [io 0x0680-0x069f]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0xffff]
pnp 00:06: [io 0x1c00-0x1cfe]
pnp 00:06: [io 0x1d00-0x1dfe]
pnp 00:06: [io 0x1e00-0x1efe]
pnp 00:06: [io 0x1f00-0x1ffe]
pnp 00:06: [io 0x1800-0x18fe]
pnp 00:06: [io 0x164e-0x164f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x1854-0x1857]
pnp 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0a00-0x0a1f]
pnp 00:09: [io 0x0a20-0x0a3f]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0044-0x005f]
pnp 00:0a: [io 0x0062-0x0063]
pnp 00:0a: [io 0x0065-0x006f]
pnp 00:0a: [io 0x0072-0x007f]
pnp 00:0a: [io 0x0080]
pnp 00:0a: [io 0x0084-0x0086]
pnp 00:0a: [io 0x0088]
pnp 00:0a: [io 0x008c-0x008e]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0b: [mem 0xfed10000-0xfed17fff]
pnp 00:0b: [mem 0xfed18000-0xfed18fff]
pnp 00:0b: [mem 0xfed19000-0xfed19fff]
pnp 00:0b: [mem 0xf0000000-0xf7ffffff]
pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
pnp 00:0b: [mem 0xfed90000-0xfed93fff]
pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
pnp 00:0b: [mem 0xff000000-0xffffffff]
pnp 00:0b: [mem 0xfee00000-0xfeefffff]
pnp 00:0b: [mem 0xeffef000-0xeffeffff]
pnp 00:0b: [mem 0xefff0000-0xefff0fff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x1c00-0x1cfe] has been reserved
system 00:06: [io 0x1d00-0x1dfe] has been reserved
system 00:06: [io 0x1e00-0x1efe] has been reserved
system 00:06: [io 0x1f00-0x1ffe] has been reserved
system 00:06: [io 0x1800-0x18fe] has been reserved
system 00:06: [io 0x164e-0x164f] has been reserved
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:09: [io 0x0a00-0x0a1f] has been reserved
system 00:09: [io 0x0a20-0x0a3f] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xeffef000-0xeffeffff] has been reserved
system 00:0b: [mem 0xefff0000-0xefff0fff] has been reserved
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xef300000-0xef3fffff]
pci 0000:00:01.1: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xef200000-0xef2fffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:04:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.2: bridge window [io disabled]
pci 0000:00:1c.2: bridge window [mem 0xef100000-0xef1fffff]
pci 0000:00:1c.2: bridge window [mem pref disabled]
pci 0000:07:01.0: PCI bridge to [bus 08-08]
pci 0000:07:01.0: PCI bridge to [bus 08-08]
pci 0000:07:01.0: bridge window [io disabled]
pci 0000:07:01.0: bridge window [mem 0xee800000-0xeecfffff]
pci 0000:07:01.0: bridge window [mem pref disabled]
pci 0000:07:07.0: PCI bridge to [bus 09-09]
pci 0000:07:07.0: PCI bridge to [bus 09-09]
pci 0000:07:07.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:07.0: bridge window [mem 0xeee00000-0xeeffffff]
pci 0000:07:07.0: bridge window [mem pref disabled]
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:00.0: bridge window [mem 0xee800000-0xeeffffff]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 06-09]
pci 0000:00:1c.3: PCI bridge to [bus 06-09]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xee800000-0xef0fffff]
pci 0000:00:1c.3: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 0a-42]
pci 0000:00:1c.4: PCI bridge to [bus 0a-42]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xee0fffff]
pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xd1ffffff 64bit pref]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: setting latency timer to 64
pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:01.0: setting latency timer to 64
pci 0000:07:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:07:07.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 10 [mem 0x9f200000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xef300000-0xef3fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xef200000-0xef2fffff]
pci_bus 0000:04: resource 1 [mem 0xef100000-0xef1fffff]
pci_bus 0000:05: resource 1 [mem 0xef100000-0xef1fffff]
pci_bus 0000:05: resource 5 [mem 0xef100000-0xef1fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xee800000-0xef0fffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xee800000-0xeeffffff]
pci_bus 0000:08: resource 1 [mem 0xee800000-0xeecfffff]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xeee00000-0xeeffffff]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 1 [mem 0xd8000000-0xee0fffff]
pci_bus 0000:0a: resource 2 [mem 0xb0000000-0xd1ffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17110k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1391464909.359:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31245
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 4F5B1EA12164261D
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.1: irq 30 for MSI/MSI-X
pcieport 0000:06:00.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
pcieport 0000:06:00.0: irq 31 for MSI/MSI-X
pcieport 0000:07:01.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
pcieport 0000:07:01.0: irq 32 for MSI/MSI-X
pcieport 0000:07:07.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
pcieport 0000:07:07.0: irq 33 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 000000008bcf3c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 000000008bcf3618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 000000008bcf2d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xef43b000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.3.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xef43a000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.3.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2014-02-03 22:01:50 UTC (1391464910)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
[drm:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 34 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
usb 1-1: new high speed USB device number 2 using ehci_hcd
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
i915 0000:00:02.0: More than 8 outputs detected
i915: fixme: max PWM is zero
acpi device:66: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
usb 2-1: new high speed USB device number 2 using ehci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ACPI: WMI: Mapper loaded
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:00:14.0: irq 35 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.3.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.3.1.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
ahci 0000:03:00.0: irq 36 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
ahci 0000:03:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m512@0xef210000 port 0xef210100 irq 36
ata2: SATA max UDMA/133 abar m512@0xef210000 port 0xef210180 irq 36
Refined TSC clocksource calibration: 3498.984 MHz.
Switching to clocksource tsc
ata1: SATA link down (SStatus 0 SControl 300)
usb 3-9: new high speed USB device number 2 using xhci_hcd
usb 3-9: New USB device found, idVendor=05e3, idProduct=0610
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: USB2.0 Hub
usb 3-9: Manufacturer: GenesysLogic
usb 3-9: configuration #1 chosen from 1 choice
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 3 ports detected
usb 3-10: new high speed USB device number 3 using xhci_hcd
usb 3-10: New USB device found, idVendor=05e3, idProduct=0610
usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-10: Product: USB2.0 Hub
usb 3-10: Manufacturer: GenesysLogic
usb 3-10: configuration #1 chosen from 1 choice
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 3 ports detected
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata2: SATA link down (SStatus 0 SControl 300)
Adaptec aacraid driver 1.2-0[30200]-ms
aacraid 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
aacraid 0000:08:00.0: setting latency timer to 64
IRQ 16/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
usb 3-13: new low speed USB device number 4 using xhci_hcd
usb 3-13: New USB device found, idVendor=04ca, idProduct=0022
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: USB Keyboard
usb 3-13: Manufacturer: LITEON Technology
usb 3-13: configuration #1 chosen from 1 choice
usb 3-13: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input4
generic-usb 0003:04CA:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:14.0-13/input0
usb 3-14: new low speed USB device number 5 using xhci_hcd
usb 3-14: New USB device found, idVendor=045e, idProduct=00f6
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: Product: Comfort Optical Mouse 1000
usb 3-14: Manufacturer: Microsoft
usb 3-14: configuration #1 chosen from 1 choice
usb 3-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input5
generic-usb 0003:045E:00F6.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:14.0-14/input0
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=05e3, idProduct=0612
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB3.0 Hub
usb 4-5: Manufacturer: GenesysLogic
usb 4-5: configuration #1 chosen from 1 choice
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 3 ports detected
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: New USB device found, idVendor=05e3, idProduct=0612
usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-6: Product: USB3.0 Hub
usb 4-6: Manufacturer: GenesysLogic
usb 4-6: configuration #1 chosen from 1 choice
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 3 ports detected
AAC0: kernel 5.2-0[19109] Dec 6 2012
AAC0: monitor 5.2-0[19109]
AAC0: bios 5.2-0[19109]
AAC0: serial 3A31133BDCD
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi2 : aacraid
scsi 2:0:0:0: Direct-Access Adaptec Mirror V1.0 PQ: 0 ANSI: 2
scsi 2:1:0:0: Direct-Access ST2000NC000-1CX1 CE02 PQ: 1 ANSI: 5
scsi 2:1:1:0: Direct-Access ST2000NC000-1CX1 CE02 PQ: 1 ANSI: 5
firewire_ohci 0000:05:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci: Added fw-ohci device 0000:05:02.0, OHCI version 1.10
sd 2:0:0:0: [sda] 3900682240 512-byte logical blocks: (1.99 TB/1.81 TiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 06 00 10 00
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI removable disk
dracut: Scanning devices sda3 sda5 for LVM logical volumes vg_tau/tau_swap vg_tau/tau_root
dracut: inactive '/dev/vg_tau/tau_swap' [32.00 GiB] inherit
dracut: inactive '/dev/vg_tau/tau_root' [64.00 GiB] inherit
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_tau-tau_root
firewire_core: created device fw0: GUID 00224dffffa21274, S400
dracut: Loading SELinux policy
type=1404 audit(1391464913.279:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 282726 rules.
SELinux: 2048 avtab hash slots, 282726 rules.
SELinux: 9 users, 12 roles, 4019 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 282726 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1391464913.642:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 37 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: registered PHC clock
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:ab:f4:0b
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
e1000e 0000:02:00.0: irq 38 for MSI/MSI-X
e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x4) 68:05:ca:1b:90:d4
e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth1: MAC: 0, PHY: 4, PBA No: D50868-009
e1000e 0000:02:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:02:00.1: setting latency timer to 64
e1000e 0000:02:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
e1000e 0000:02:00.1: irq 39 for MSI/MSI-X
e1000e 0000:02:00.1: eth2: (PCI Express:2.5GT/s:Width x4) 68:05:ca:1b:90:d5
e1000e 0000:02:00.1: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.1: eth2: MAC: 0, PHY: 4, PBA No: D50868-009
snd_hda_intel 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:03.0: irq 40 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: setting latency timer to 64
hda_codec: invalid CONNECT_LIST verb 6[1]:0
hda_codec: invalid CONNECT_LIST verb 7[1]:0
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: resource (null) [io 0x1828-0x182f] conflicts with ACPI region PMIO [io 0x1800-0x187f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io 0x1c00-0x1c3f] conflicts with ACPI region GPRL [io 0x1c00-0x1c3f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
igb 0000:09:00.0: setting latency timer to 64
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
igb 0000:09:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
igb 0000:09:00.0: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
igb 0000:09:00.0: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
igb 0000:09:00.0: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
igb 0000:09:00.0: irq 46 for MSI/MSI-X
igb 0000:09:00.0: added PHC on eth3
igb 0000:09:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:09:00.0: eth3: (PCIe:2.5Gb/s:Width x1) 00:22:4d:ab:f4:13
igb 0000:09:00.0: eth3: PBA No: 000500-000
igb 0000:09:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 2:1:0:0: Attached scsi generic sg1 type 0
scsi 2:1:1:0: Attached scsi generic sg2 type 0
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x16, date = 2013-08-07
microcode: CPU1 updated to revision 0x16, date = 2013-08-07
microcode: CPU2 updated to revision 0x16, date = 2013-08-07
microcode: CPU3 updated to revision 0x16, date = 2013-08-07
microcode: CPU4 updated to revision 0x16, date = 2013-08-07
microcode: CPU5 updated to revision 0x16, date = 2013-08-07
microcode: CPU6 updated to revision 0x16, date = 2013-08-07
microcode: CPU7 updated to revision 0x16, date = 2013-08-07
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 33554424k swap on /dev/mapper/vg_tau-tau_swap. Priority:-1 extents:1 across:33554424k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:00:19.0: irq 37 for MSI/MSI-X
e1000e 0000:00:19.0: irq 37 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
e1000e 0000:02:00.0: irq 38 for MSI/MSI-X
e1000e 0000:02:00.0: irq 38 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
e1000e 0000:02:00.1: irq 39 for MSI/MSI-X
e1000e 0000:02:00.1: irq 39 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth2: link is not ready
8021q: adding VLAN 0 to HW filter on device eth2
ADDRCONF(NETDEV_UP): eth3: link is not ready
8021q: adding VLAN 0 to HW filter on device eth3
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
8021q: adding VLAN 0 to HW filter on device virbr0
Ebtables v2.0 registered
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.13)
BUG: Bad page state in process rpm pfn:366604
page:ffffea000be650e0 flags:0040000000000000 count:0 mapcount:-32 mapping:(null) index:0 (Tainted: G I--------------- )
Pid: 1277, comm: rpm Tainted: G I--------------- 2.6.32-431.3.1.el6.x86_64 #1
Call Trace:
[] ? bad_page+0x107/0x160
[] ? get_page_from_freelist+0x762/0x870
[] ? __alloc_pages_nodemask+0x113/0x8d0
[] ? __lru_cache_add+0x40/0x90
[] ? page_add_new_anon_rmap+0x9d/0xf0
[] ? alloc_pages_vma+0x9a/0x150
[] ? do_huge_pmd_anonymous_page+0x14d/0x3b0
[] ? handle_mm_fault+0x2f0/0x300
[] ? vma_adjust+0x556/0x5e0
[] ? __do_page_fault+0x138/0x480
[] ? vma_merge+0x29a/0x3e0
[] ? do_brk+0x26c/0x350
[] ? do_page_fault+0x3e/0xa0
[] ? page_fault+0x25/0x30